Insert the blades with the main axis bar. For best retults, align the drone body with contoller toward the same direction before/during binding.īlade installation 1. Special operation controls Auto Return Press the Auto Return button during the flight, the drone will trace the shortest way flying back to the takeoff point. Flying speed/sensitivity setting can be adjusted before or during flight. Pressing the button will switch the speed in the following speed setting: Low > Medium > High > Low Low (1 beep) Medium (2 beeps) High (3 beeps) Tip: It is best to start flying in default low speed setting until you are comfortable to the flying speed. Special operation controls Speed/Sensitivity Selection The drone's flying speed and sensitivity can be adjusted by pressing the Speed Selection Button. Caution: Please do NOT test this feature on people. This feature will reduce the chance of crashing. This feature will work automatically when it is flying at least 3ft above the ground. When it detects obstacles within 2~3ft (depend on environment/object), the drone will stop approaching and avoid the obstacle automatically. Special operation controls Obstacle Avoidance Module Mount the Obstacle Avoidance Module to the bottom of the drone. Right Fly Video Taking Long press the button to shoot a video. Left Fly Photo Taking Short press the button to take a photo. Right stick controls the rotation forward, backward, left or right movement. You can now push the Throttle Stick up slightly to takeoff.īasic operation controls Basic operation: Left stick controls altitude and direction.

Step 1 Step 2 Step 3 Start / Stop the motors Start the motors (Takeoff): Press the Auto Takeoff button, the blades will start to spin. Push the Throttle Stick to the up position, the LED light on the drone will change from flashing to solid on after binding has been successful. Power on the drone unit and place on level surface, the LED on drone will flash continuesly. Take out the screw on the main axis bar with the provided screw driver. Clip the antenna onto the antenna holder. Push the Camera Moduel all the way into the socket at the bottom of the drone. Push the Obstacle Avoidance Module according to the direction shown on the module to mount. Match the Obstacle Avoidance Module with the socket at the bottom of the drone. Insert the battery in to the drone after battery is fully charged.Īccessories installation Obstacle Avoidance Module installation 1. The red charging light on the USB Charging Cable will turn on when charging is complete. Connect the USB Charging Cable to a USB power source (e.g.: USB adapter, USB port on a computer) to start charging the battery. Connect the USB Charging Cable to the battery. Power off the drone, press the battery release button, take out the battery. Left/Right Side-Fly Trimmer 14.Ĭharging and installing battery for the drone 1. Power Button - Power On: Long press - Power Off: Long press again 4. Product Features Advance auto-hovering, auto-launch & auto-return technologies Obstacle avoidance flight technologies Modular design for easy upgrades and maintenance 6-axis Flight Control System WiFi real-time video streaming 0.ĭiagrams 1. Waste Electrical and Electronic Equipment (WEEE) When this appliance is out of use, please remove all batteries and dispose of them separately. Please help protect the environment from health risks by disposing of the batteries properly, and taking them to a local collecting facility for safe recycling. These items may be composed of hazardous materials. The crossed-out dust bin symbol indicates that batteries (primary, rechargeable, button cells, packs, etc) must not be put in household waste. You agree to use this product in such a way that you will comply with all local and federal regulations, including, but not limited to, personal privacy laws. You are responsible for your own actions, behavior, and conduct while using this device. THE USE OF THIS PRODUCT IS A SIGN OF YOUR COMPLIANCE WITH THIS DISCLAIMER. CONTENTS LIST 1x Screw Driver 1x Phoenix 1x Controller 4x Blade Guard 1x Camera 4x Blade 1x Battery 1x USB Charging Cable 1 x Obstacle Avoidance Module For questions or difficulties operating your TDR devices, please contact: PAGE 2ĭISCLAIMER Read this disclaimer and instructions thoroughly before operating this device. Item: 61336 Ages: 14+ I N N O VAT I V E L E G A C Y Phoenix INTERCHANGEABLE MODULAR DRONE Instruction Guide Keep the Instruction Guide for future reference.

Tdr phoenix drone usb cable